6N2 FU19 Headphone Amplifier
Item#: MAHP0256
$225 (unit price)
Quantity:
$225 (unit price)
Quantity:
Buy more...Get lower price
| Quantity | Unit price (USD) |
| >= | $ 225 |
| >= | $ 210 |
| >= | $ 195 |
Features and Specifications
6N2 FU19 Vacuum Tube Headphone AmplifierThis amp is with an aluminum alloy front panel, a 1.2mm thick iron plate vertical chassis, an enlarged power transformer using an 86*50 H360 core, and choke using 66*19 Z11 0.35 annealed silicon steel. The output transformer is wound using a special process (66*19 Z11 0.35). The output binding posts use crystal acrylic posts. Dimensions: 19*6*30cm. The sound quality is further improved, with a larger dynamic range and enhanced spatial sense.
We used the Sennheiser HD800 flagship moving-coil over-ear headphones for trial listening. The power supply is available in 110V or 220V.
Note: This headphone amplifier finished product is a perfect match for the Sennheiser HD600, HD650, HD700, and HD800 series headphones. No circuit diagrams are provided.
1. Product Features one:
Uses Beijing 6N2 tubes driven in parallel with Beijing FU19 vacuum tubes in a Class A amplification circuit, utilizing output transformer output.
The core output transformer uses Z11 0.35mm 66*19 silicon steel sheets wound with a special process. The power transformer uses H14 360 0.5 annealed silicon steel sheets.
One line-level audio input, complete headphone protection circuit, and output transformer no-load protection.
2. Product Features two:
The signal source can be a CD player or computer audio source (the computer sound card must have a line-out port).
Uses all AC filament point-to-point lighting. Tested with 102dB headphones, absolutely no AC hum can be heard – it feels as quiet as if it were turned off.
Uses 6N2 driving FU19 in a parallel Class A amplifier circuit, outputting 4W + 4W power amplification to drive speakers. Requirements for paired speakers: Impedance (4–8) ohms, 2-way bookshelf speakers, sensitivity above 90dB, size 6.5 inches or larger. Headphone compatibility: 19–600 ohms (approx. 1W).
The volume potentiometer uses a fully sealed Taiwanese A100k potentiometer, ensuring clear positioning and left-right balance.
Uses metal film resistors with up to 1% precision and imported electrolytic capacitors.
3. Performance & Specifications:
The output characteristics of this machine: The 4-ohm port is direct output; the 8-ohm output shares a switch with the headphone jack.
Product Weight: Approx. 6kg; Packaging Dimensions: 40*35*25cm
Product Dimensions: 32*18*16cm (including tube height)
Specification Table
Input: One RCA input
Output: Rear – Speaker connection output impedance 4Ω, 8Ω dual terminals, 4W+4W. Front – 6.35mm standard headphone output jack, 19–600Ω.
Frequency Response: 26–38KHz ±2dB
Output SNR (Signal-to-Noise Ratio): >118dB "A"-wtd
Output THD (Total Harmonic Distortion): <0.008% 10Hz to 20kHz
Headphone Output Peak Value: (approx. 1W) (For corresponding power, please calculate according to the corresponding headphone impedance)
Warranty: Quality assurance. Vacuum tubes are covered by a 2-month warranty. The whole machine has 1 year of free maintenance. Shipping costs incurred during the warranty period are borne by the buyer. No circuit diagrams are provided.
More images of MAHP0256
MAHP0256
MAHP0256
MAHP0256
MAHP0256










