NAP200 Board only
Share to:
Item#: MABR0104
$55 (unit price)
Quantity:
$55 (unit price)
Quantity:
Buy more...Get lower price
| Quantity | Unit price (USD) |
| >= | $ 55 |
| >= | $ 51 |
| >= | $ 48 |
Features and Specifications
NAP200 Gold sealed Power Amplifier Board only(not including 2pcs 10000uf filter caps and no heatsink)
PCB size: 160X143MM.
PCB size: 160X143MM.
Output power: 100WX2 (8ohm) 150WX2 (4 ohm).
Load: 2-8 ohm.
Distortion rate: 0. 002%.
Signal to noise ratio: > 100dB.
Frequency response: 10Hz-25KHZ.
Supply voltage: AC18X2 to AC35X2.
Protection circuit: output DC protection overheat protection switch to prevent impact protection.
Debugging: first adjust 200ohm adjustable resistance to make the horn output midpoint in 20MV, adjust 1K resistance to make the voltage drop between TEST point voltage.
Within 20-50MV. Corresponding static current 100-250MA.
Naim is a very attractive old brand in the UK.
Naim is a very attractive old brand in the UK.
NAP 200 can carry a low impedance of 2 ohms for a long time and provides output power of 100 watts at 8 ohms. Most fans think it has an English flavor.
The high-pitched voice is bright and beautiful, the alto is full, and the bass is not too domineering, but the human voice has a good image, the resistance to hearing is common, and it has the feeling of an electron tube.
This product is designed based on NAP200, with optimized circuit design, selected high quality components, especially 4 motor Roller or ON gold seal output tube 2N3773 Magneto BVceotives 140V, cymbal 16A, Po=150W allows the line to output under 8 ohm.
The heatsink is our item MACH0310
The transformer is our item MATR0281
The heatsink is our item MACH0310
The transformer is our item MATR0281
More images of MABR0104
MABR0104
MABR0104
MABR0104
MABR0104
MABR0104
MABR0104
MABR0104
